Thread: Stereo Upgrade
View Single Post
Old 09-04-2010, 03:39 AM
Posts: n/a

Yes, there are a couple of wiring harness interfaces you may need. But first, to determine what those are, we'll need to know what your stock system is and what head unit you are going to put in. And do you have steering wheel controls for your audio system?

Depending on what system you have now and what you are going to do, you may only need one of these or you might need a few of them.

Here are the PacAudio harnesses available for your truck:

C2ACHY: Aftermarket amp interface for CAN BUS vehicles.

C2RCHY4: Aftermarket head unit with NAV outputs.

C2R-CHYNA: Radio replacement interface for non-amplified Chrysler vehicles.

SWI-JACK: Steering wheel control interface for JVC, Alpine, Clarion, Kenwood, OEM, Valor and Blaupunkt radios

SWI-CAN: CANBUS steering wheel control add-on interface for Chrysler vehicles.

So, as you can see, what you get depends on what you currently have.

Also, if your stock unit is a 1.5 DIN and you are going to a double DIN head unit, you'll want to get the NAV bezel. About $100 online. I got mine online from an authorized MOPAR parts seller.
Reply With Quote