View Single Post
  #4  
Old 09-09-2010, 11:05 PM
moparornocar72's Avatar
moparornocar72 moparornocar72 is offline
Dodge Ram Forum Member


 
Join Date: Aug 2010
Location: Auburn, AL
Age: 25
Posts: 3,663
Gender: Male
Vehicle: 2010 Dodge Ram
Trim Level: Big Horn
Color: Mineral Grey
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 7
Rep:630
moparornocar72 is a name known to allmoparornocar72 is a name known to allmoparornocar72 is a name known to allmoparornocar72 is a name known to allmoparornocar72 is a name known to allmoparornocar72 is a name known to all
Default


1.Position the rear seat assembly into the vehicle and secure the hooks (3) to the loops (1 and 2).

2.Install the front mounting bolts (1).

3.Install the remaining bolts (1, 4) and tighten all bolts to 47 Nm (35 ft. lbs.).

4.Position the sholder belt (2) back into place and install the bolt (1).
5.Tighten the bolt to 23 Nm (17 ft. lbs.).

6.Connect the electrical connectors (1), if equipped.

Hope this helps.PM ME if you need anything!
__________________
14.268 @ 95 MPH Full Trim

Proudly Sponsored by Bully's Performance
Reply With Quote