View Single Post
  #13  
Old 09-15-2010, 12:22 AM
moparornocar72's Avatar
moparornocar72 moparornocar72 is offline
Dodge Ram Forum Senior Member

 
Join Date: Aug 2010
Location: Auburn, AL
Age: 26
Posts: 3,668
Gender: Male
Vehicle: 2010 Dodge Ram
Trim Level: Big Horn
Color: Mineral Grey
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 7
Rep:630
moparornocar72 is a name known to allmoparornocar72 is a name known to allmoparornocar72 is a name known to allmoparornocar72 is a name known to allmoparornocar72 is a name known to allmoparornocar72 is a name known to all
Default

Quote:
Originally Posted by firelt View Post
Im interested in mor einfo on this one please and thank you!

A/T - Converter Shudder On Vehicles With Less Than 4K
HERE YA GO:
A/T - Converter Shudder On Vehicles With Less Than 4K Mi NUMBER: 21-022-08
GROUP: Transmission
DATE: October 8, 2009
SUBJECT:
Torque Convertor Shudder On Vehicles With Less Then 4000 Miles
OVERVIEW:
This bulletin involves using the StarSCAN(R) to verify that the "Torque Converter Break In" option is disabled (status = false).
MODELS:
2009 (DS) Ram Truck2009 (HB) Durango2009 (JK) Wrangler2009 (KA) Nitro2009 (KA) Nitro (International Markets)2009 (K1) Cherokee (CKD)2009 (KK) Liberty2009 (KK) Liberty (International Markets)2009 (LC) Challenger2009 (LE) 300C/300 Touring (International Markets)2009 (L2) 300 (China)2009 (LX) 300/Magnum/Charger2009 (ND) Dakota
NOTE :This Bulletin applies to DS/JK/LX/LE/LC/HB/KA/KK/K1 and ND models equipped with a 42 RLE transmission (Sales Code DGV) built before September 29, 2008 (0929XX MDH) or L2 models built with a 42 RLE transmission (Sales Code DGV) built before October 10, 2008 (1010XX MDH).
SYMPTOM/CONDITION:
Some customers may experience a shudder condition within the first 4000 miles. This shudder happens during steady state driving with the torque convertor in partial lock while the transmission is still in Torque Converter break in mode.
The shudder feels like the vehicle is being driven over rumble strips.
DIAGNOSIS:
Using a Scan Tool (StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine and transmission Systems are functioning as designed. If DTC's are present record them on the repair order and repair as necessary before proceeding further with this bulletin.
If the above symptom/condition is experienced or can be verified, perform the Repair Procedure.

SPECIAL TOOLS / EQUIPMENT REQUIRED:
REPAIR PROCEDURE:
1.Using the StarSCAN(R) select PCM.
2.Read DTC from the PCM.
3.Are any PCM DTC present?
a.No >>> proceed to Step # 4
b.Yes >>> Repair DTC as necessary then proceed to Step # 4
4.Select the "Misc Functions Menu" on the StarSCAN(R).
5.Select the "TCC Break In" option.
6.Select "Start" and the select "Next"
7.Select "View Current TCC Break-In Status"
8.Is the "Torque Converter Break In Complete status False?
a.Yes >>> Using the StarSCAN(R) disable "Torque Converter Break-In"
b.No >>> This bulletin does not apply, further diagnosis is required.
POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:


More geared for 09 but 10 tsb havent been updated much recently
__________________
14.268 @ 95 MPH Full Trim

Proudly Sponsored by Bully's Performance
Reply With Quote