View Single Post
  #6  
Old 09-20-2010, 12:40 AM
brad12kx's Avatar
brad12kx brad12kx is offline
Just some guy in Canada


 
Join Date: Apr 2010
Location: Brandon, MB
Posts: 22,792
Gender: Male
Vehicle: 2010 Ram 1500 QC
Trim Level: Sport
Color: Black
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 21
Rep:2581
brad12kx has a reputation beyond reputebrad12kx has a reputation beyond reputebrad12kx has a reputation beyond reputebrad12kx has a reputation beyond reputebrad12kx has a reputation beyond reputebrad12kx has a reputation beyond reputebrad12kx has a reputation beyond reputebrad12kx has a reputation beyond reputebrad12kx has a reputation beyond reputebrad12kx has a reputation beyond reputebrad12kx has a reputation beyond repute
Default

The complete procedure is on page 465 of your manual. it reads -

Quote:
Recreational Towing Procedure (Electronic Shift
Transfer Case) If Equipped

Use the following procedure to prepare your vehicle for
recreational towing:

1. Bring the vehicle to a complete stop.
2. Turn OFF the engine.
3. Turn the ignition switch to the ON position, but do not
start the engine.
4. Press the brake pedal.
5. Shift the transmission into NEUTRAL.
6. Press the transfer case switch NEUTRAL button for
four seconds.
7. After the shift is completed and the NEUTRAL light
comes on, release the NEUTRAL button.
8. Start the engine.
9. Shift the transmission into REVERSE.
10. Release the brake pedal for five seconds and ensure
that there is no vehicle movement.
11. Repeat Steps 9 and 10 with the transmission in
DRIVE.
12. Turn the engine OFF and place the ignition switch in
the OFF position.
13. Shift the transmission into PARK.
14. Apply the parking brake.
15. Attach the vehicle to the tow vehicle with the tow bar.
16. Release the parking brake.
NOTE:
The transfer case cannot be shifted into NEUTRAL
from the 4WD AUTO (if equipped) position.
Steps 1 through 5 are requirements that must be met
prior to pressing the NEUTRAL button, and must
continue to be met until the four seconds elapses and
the shift has been completed. If any of these requirements
(with the exception of 3 - Key ON) are not met
prior to pressing the NEUTRAL button or are no
longer met during the four second timer, then the
NEUTRAL indicator light will flash continuously until
all requirements are met or until the NEUTRAL button
is released.
The ignition switch must be in the ON position for a
shift to take place and for the position indicator lights
to be operable. If the ignition switch is not in the ON
position, the shift will not take place and no position
indicator lights will be on or flashing.
The flashing NEUTRAL indicator light indicates that
shift requirements have not been met.

Returning to Normal Operation Electronic Shift
Transfer Case

Use the following procedure to prepare your vehicle for
normal usage:

1. Bring the vehicle to a complete stop.
2. Turn OFF the engine.
3. Turn the ignition switch to the ON position, but do not
start the engine.
4. Press the brake pedal.
5. Shift the transmission into NEUTRAL.
6. Press the transfer case switch NEUTRAL button for
one second.
7. After the NEUTRAL indicator light turns off, release
the NEUTRAL button.
8. After the NEUTRAL button has been released, the
transfer case will shift to the position identified by the
selector switch.
9. Shift the transmission into PARK.
NOTE:
Steps 1 through 5 are requirements that must be met
prior to pressing the transfer case NEUTRAL button
and must continue to be met until one second elapses
and the shift has been completed. If any of these
requirements (with the exception of step 3 - key ON)
are not met prior to pressing the NEUTRAL button, or
are no longer met during the one second time, then all
of the mode position indicator lights will flash continuously
until all requirements are met or until the
NEUTRAL button is released.
The ignition switch must be in the ON position for a
transfer case shift to take place and for the position
indicator lights to be operable. If the ignition switch is
not in the ON position, the shift will not take place and
no position indicator lights will be on or flashing.
The flashing NEUTRAL position indicator light indicates
that shift requirements have not been met.
Hope this helps.
__________________
brad

Interested in one of my mods?
If it's underlined, it's a link to that mods thread.

2010 Ram 1500 Hemi Sport, 3.92, Leather, NAV, Alpine, Sunroof, Trailer tow, Brake Contoller, Rear Cam
Mods - 3M clear protect, Decals removed, Electric Tailgate Lock, Tow Hooks, Skid Plates, Bed Rug, Pace Edwards Bedlocker Electric Tonneau, Timbren Rear SES, Tinted Tail Lights, Debadged, Grill Blacked Out, Shorty Antenna, Black Chromed Emblems, Lightly tinted front windows, DS Predator, Cabin Air Filter, K&N Drop In, Mufflex (Magnaflo) DOD24M, Sonnax line pressure booster, Volant CAI
Reply With Quote