View Single Post
Old 11-14-2010, 02:59 PM
ken99 ken99 is offline
Dodge Ram Forum Senior Member
Join Date: Jul 2010
Location: Montana
Posts: 107
Gender: Male
Vehicle: 2010 Ram 1500 Crew 4x4
Trim Level: SLT
Color: Austin Tan Pearl
Engine: 2009-2010 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
ken99 is on a distinguished road

Originally Posted by Incinr8 View Post
Hello All. I have an 2011 Ram with two of the large style plugs under the dash, No small plug. Both are the exact same size and have the exact some color wires going to them , One just has the two wires in different positions. Anyone try this mod with a 2011? Thanks.
I suspect you only have the large plug brake controller harness and you are looking at opposite ends of the same cable. The large plug cable is wrapped up with the main wire harness so it is hard to trace without removing all the tape. The large plug cable plugs into a socket next to the main harness junction where the harness passes through the firewall. The same style plug is used on both ends. I've supplied pictures of the cable where it plugs into the main harness. I would use a volt meter to confirm this.

Unplugged at the junction.


Attached Images
File Type: jpg unplugged.jpg (81.1 KB, 326 views)
File Type: jpg plugged.jpg (78.4 KB, 327 views)

Last edited by ken99; 11-14-2010 at 03:03 PM.
Reply With Quote