View Single Post
Old 01-05-2011, 09:31 PM
johnny0874 johnny0874 is offline
Dodge Ram Forum Newcomer
Join Date: Dec 2010
Age: 41
Posts: 25
Gender: Male
Vehicle: 1994 ram 2500
Trim Level: larime
Color: multiple
Engine: 1994-1995 359ci (5.9L) Cummins 12-valve Diesel I6 175hp 420lb/ft(manual), 160hp 400lb/ft(auto)
Rep Power: 0
johnny0874 is on a distinguished road
Default exciting day at my house

Well, I laid the last layer of glass on the dash today... tomorrow I'll sand it down smooth and lay on some filler... then sand and prime it on Friday.

While I was cleaning up some surface rust on the seat brackets and floor pan, I found a 9" crack along the base of my cab at the rear wall. I reshaped it as best I could with a dolly and a hammer and then sealed it with silicon for now. I'm going to do a body lift this summer, so I'll weld it up when I have the cab and bed loose and it's easier to get to it with a wire-feed welder.

I did manage to get all of the signal cable and about half of the power cable pulled into place... I need to start drawing up some plans for the center console so I'll know how long to make the power cables (have to know where the caps and the fuses will be mounted).
Reply With Quote