View Single Post
Old 01-15-2011, 11:31 AM
Posts: n/a

Yes, do a total flush and use what the mfgr recommends on coolant for your year & engine truck.

For your HEMI, use of Propylene Glycol coolants is not recommended.

Use a 50/50 mix of Ethylene Glycol & water solution. Mopar anti-freeze/coolant formula MS-9769 was used in your truck when new and was combined with organic corrosion resistors.

So a good Ethylene Glycol anti-freeze with corrosion protection, mixed 50/50 with water, will do the trick.

Your cooling system capacity is 16.2 quarts.
Reply With Quote