View Single Post
  #5  
Old 01-30-2011, 07:27 PM
AJ1500 AJ1500 is offline
Dodge Ram Forum Newcomer
 
Join Date: Nov 2010
Age: 52
Posts: 19
Gender: Male
Vehicle: 1998 Dodge Ram 1500
Trim Level: standard
Color: white
Engine: 1998-2001 360ci (5.9L) Magnum V8 245hp(standard), 250hp(Sport package)
Rep Power: 0
Rep:10
AJ1500 is on a distinguished road
Default

you are going to need a large adj or a whench that fits tight on the clutch fan nut
remember the nut is reverse threaded, I'm sure they make a proper half moon wrench with 2 pins to fit into the holes in the pully, however you can put 2 bolts in the holes and using a long bar to keep the pully from turning. you have to hit the wrench pretty hard with a hammer to get the clutch loose so make sure your bar doesn't bounce or it can damage your pully. once the clutch is off remove your belt and the pully and your at the WP. you don't have to hit the clutch as hard when you put it back as engine torque will tighten it more
I hope this helps
Reply With Quote