View Single Post
Old 04-19-2011, 11:28 PM
libertyfiremedic libertyfiremedic is offline
Dodge Ram Forum Member
Join Date: Oct 2010
Location: Kansas City, MO
Age: 39
Posts: 53
Gender: Male
Vehicle: 2010 Dodge Ram 1500
Trim Level: Sport
Color: Mineral Grey Metallic
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
libertyfiremedic will become famous soon enough

I'll walk you through it.... hopefully I can paint some good pics since its late and I don't have pics.

Open hood, Remove the shroud that is on just behind the grille (there are 6-7 plastic "trees" that hold it in.) Then remove the 4 10mm bolts that hold the grille in place at the top. (I put a towel or blanket between the grille and the top of the bumper at this point) Lean the grille forward to relase the clips at the bottom of the grille. Remove grille. Remove the two 10mm bolts on each headlight..... nows the tricky part... inside the fenderwell there is a door in the front. Open it. Inside there is a white plastic "locking lever"... unlock the light by pushing the lever up... at this point the light is ready to remove. Go back to the front of the truck and pull the light assembly forward. It should come out with just a little pull.

With all that said.... just check out this link
Reply With Quote