View Single Post
  #95  
Old 04-28-2011, 08:48 PM
BlackRamHemi's Avatar
BlackRamHemi BlackRamHemi is offline
Dodge Ram Forum Senior Member!
 
Join Date: Jul 2010
Age: 51
Posts: 2,032
Gender: Male
Vehicle: 2010 Ram RCSB 4x4
Trim Level: Sport
Color: Brilliant Black
Rep Power: 7
Rep:514
BlackRamHemi is a glorious beacon of lightBlackRamHemi is a glorious beacon of lightBlackRamHemi is a glorious beacon of lightBlackRamHemi is a glorious beacon of lightBlackRamHemi is a glorious beacon of lightBlackRamHemi is a glorious beacon of light
Default

First post on the previous page

Quote:
Originally Posted by BlackRamHemi View Post
To remove the puddle lamp carefully separate the trim ring piece from the mirror housing.
Start along the bottom outer corner and work it slowly towards the truck just enough for the lamp to drop out the bottom.

There's one small plastic tab inside you have to push toward the truck with a long screw driver to get it to release.

(not my ram)
Here's the tab that that you need to release

view from under the drivers side mirro looking up:



Here's the slot the tab hooks into



after...




I did my passenger side first and actually broke the tab off,
but it was a tight enough fit when I re-installed it that it doesnt even budge.

You can tell in these close up shots I only did a couple light coats, still looks dark at a distance and light output is barely affected.



__________________

Murdered.. Lowered.. Alcohol Injected ..Blowered! 500WHP

Last edited by BlackRamHemi; 04-28-2011 at 08:53 PM.
Reply With Quote