View Single Post
  #13  
Old 07-18-2011, 04:51 PM
Flat Spot Flat Spot is offline
Dodge Ram Forum Junior Member
 
Join Date: May 2011
Location: Atlanta
Age: 40
Posts: 48
Gender: Male
Vehicle: 2011 Dodge Ram 1500 Sport 4x4
Color: Black
Rep Power: 0
Rep:19
Flat Spot is on a distinguished road
Default

LOC is for Line Out Converter. I'm using an Audio Control LC8i device to sum all the channels and send them to the new amps. Knowing what I know now, I would do it over again. I would get the Pac Audio LOC and run the RCA cables back to a Audio Control cross-over. Then plug the amps into it. The LC8i is functioning as described, but way more complicated than what I was looking for.

If you noticed in the picture, I have a car seat back there for my 3 year old. There is no way I would do this if it was dangerous to him.

When the seat is back down in it's normal state, the hooks on the back of the seat fasion over the latches attached to the back wall. It's only when the seat is in the fold position (picture number 1) where the hook is over the latch which then and only then can the seat come forward.

The spacers are nothing more than MDF wood. I do have a correction and that is it looks like it's 1 inch thick and not 1/2 inch thick like I mentioned earlier.

Last edited by Flat Spot; 07-18-2011 at 04:59 PM. Reason: misspelling
Reply With Quote