View Single Post
  #233  
Old 07-22-2011, 11:46 PM
ken99 ken99 is offline
Dodge Ram Forum Senior Member!
 
Join Date: Jul 2010
Location: Montana
Posts: 107
Gender: Male
Vehicle: 2010 Ram 1500 Crew 4x4
Trim Level: SLT
Color: Austin Tan Pearl
Engine: 2009-2010 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
Rep:26
ken99 is on a distinguished road
Default

Quote:
Originally Posted by agdm619 View Post
Can someone verify if I have the right wires?
The three wires for the B connection look correct. I would use a volt meter to check each wire. The pink/green wire should be battery voltage with the key on. The readings for the white/blue and white/green wires are ~2.5 VDC (if I remember correctly).

The four wires off the blue connector represent a standard four wire brake wiring scheme, ditto for the A connector. I would build a pigtail using one of the aftermarket pigtails listed for the Superduty Ford in

http://www.etrailer.com/faq-tb-10-01...Dodge-Ram.aspx

and connect it directly to the blue connector provided by Dodge.

Last edited by ken99; 07-23-2011 at 12:01 AM.
Reply With Quote