View Single Post
  #3  
Old 08-29-2011, 02:26 PM
cyberpine cyberpine is offline
Dodge Ram Forum Senior Member!
 
Join Date: Mar 2010
Location: Miami, FL
Age: 46
Posts: 210
Gender: Male
Vehicle: 2010 Dodge Ram Quad Cab Hemi
Color: Black
Rep Power: 0
Rep:53
cyberpine will become famous soon enough
Default

Quote:
Originally Posted by SS4Luck View Post
Those are shorter than my stock 20" wheels/tires. I think they have their info wrong, the 0 offset would sit out a little bit from factory and the +12 would sit nearly stock looking inside the wheel well
Thinking shorter rims rub in different places, likely cause where the tire bubbles much lower.. possibly the A-arm. So what they are saying is (I think) -12mm is too far out and +12mm is too far in. In all 1 inch differnce between the two extremes. But somehow +0mm is acceptable?

Personally I do think on 305/60/18 that +12mm (on 18x9) is too far in, but suspect -12mm might be fine.

Related, On 20s (not 18s) A while back a Wheel place told me I could run 305/55/20s on 20x9 if I stayed between 0mm and -10mm offset .. any further in or out and i'd be looking at problems. Which makes sense considering guys with 305/55/20s on stock 20s (+18mm), have get a 1/4 spacers to not rub. The offset on our stock 20s and obstructions in the 2wd do really limit choices.
__________________
http://www.cyberpine.com
2012 Red Ram 1500 Hemi Regular Cab.
** PLEASE HELP .. Can I run 18x9 -12mm offset 4.5 Backspacing with 325/60/18 on a stock (no lift no level) 2wd 4th Gen RAM w/o rubbing? PLS MSG ME!

Last edited by cyberpine; 08-29-2011 at 02:33 PM.
Reply With Quote