View Single Post
  #1  
Old 09-17-2011, 02:25 PM
ironchef2011's Avatar
ironchef2011 ironchef2011 is offline
Dodge Ram Forum Member
 
Join Date: Aug 2011
Location: Orange County, NY
Posts: 456
Gender: Male
Vehicle: 2012 R/T
Trim Level: R/T
Color: Black
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 4
Rep:120
ironchef2011 will become famous soon enoughironchef2011 will become famous soon enough
Default 4TH Gen: Stock Alpine Subwoofer Specs

The stock Alpine subwoofer is a dual two ohm voice coil unit sized at 8" in diameter. The entire face is 8.5" and it's 4" in depth.

Two remove the subwoofer from it's box, you must remove the Torx head bolts which are sized at 25. Then, remove the two 18mm bolts holding the box into the cargo tray. Unplug the box, flip it over, and remove the phillips head bolt on the bottom of the box. Turn the box over and remove the subwoofer by disconnecting each of the wiring harnesses.

In my opinion, the plastic box is not suitable for a stronger subwoofer. It will just resonate and flex and the mounting ring is paper thin. The stock Alpine subwoofer is appropriate for this type of enclosure and any need to add more or a different style of bass response should be handled by a different amplifier and subwoofer/enclosure.
Attached Images
File Type: jpg Alpine_Sub-1.jpg (119.3 KB, 445 views)
File Type: jpg Alpine_Sub-2.jpg (120.1 KB, 339 views)
__________________
2012 R/T 392

Last edited by ironchef2011; 09-17-2011 at 09:20 PM.
Reply With Quote
Sponsored links