View Single Post
  #5  
Old 11-18-2011, 01:34 PM
dfskinner dfskinner is offline
Dodge Ram Forum Newcomer
 
Join Date: Jun 2011
Location: Va Beach
Posts: 9
Gender: Male
Vehicle: 2004 Dodge Ram 1500 SLT 4X4
Trim Level: Quad Cab 5.7L Hemi
Color: Burgandy
Engine: 2003-2008 345ci (5.7L) Hemi V8 345hp 375lb/ft
Rep Power: 0
Rep:10
dfskinner is on a distinguished road
Default

Wheel Bearing is about $100 (without ABS) and approx $150 (with ABS), depending on where you purchase..... Advanced Auto seemed to have the best price.....

I have a question about doing the passanger side....

2004 Dodge Ram 4X4 5.7 L V8 Quad Cab.....

I'm using the auto hobby shop on base, removed all the parts down to the nut holding the axle in the wheel bearing, but can't get the axle to slide off the drive shaft off the spline coming from the transaxle... not stuck in the wheel bearing, just can't get it off the transaxle... slides out to what seems about 2 inches.....

Any advice from the members of the forum..... paid way too much to have the driver's side done about 6 mths ago and now I need to do the passanger side..... thought I'd do it myself, just need some advice on how to remove the axle... thanks
Reply With Quote