Thread: off road lights
View Single Post
  #2  
Old 12-17-2011, 10:57 PM
erm
Guest
 
Posts: n/a
Default

Find some lights with a pedestal mount (bracket with the bolt through the bottom) and when you drill the holes, fish the wires through the tube of the brush guard, then into the truck either between the grill and bumper or under the bumper. Just make sure you protect the wires from rubbing on sharp edges.

Most off road light kits come with a relay, a harness and a switch that goes to your cabin. The relay is directly connected to the battery and you will have a ground, then two or three leads to the switch depending on whether or not the switch lights up.

Holler up if you have more questions.
Reply With Quote