Originally Posted by JMAZ
I really like the black. I'd like to try it. I assume the pieces have to be removed to plastidip, or can you just mask?
Yes the pieces had to be removed its a total of 3 torques and 2 screws. Two torque screws on the top where it says ram underneath the rubber tray. One behind the plug the cover around the plug will pop off and two screws under the rubber tray in-front of the shifter. Then everything just pulls right off. I found it was easier to do it this way but you might be able to get away with masking it off. Also if you have the pieces out of the truck you can use a hair dryer like I did to speed the dry time up to 15 minutes between coats.