View Single Post
Old 01-28-2012, 01:42 PM
theweavman theweavman is offline
Dodge Ram Forum Senior Member

Join Date: Oct 2010
Location: Las Vegas, NV
Age: 67
Posts: 367
Gender: Male
Vehicle: 2009 Dodge Ram 4X4
Trim Level: Laramie Crew Cab
Color: Austin Tan Pearl &Lt. Graystone Pearl
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
theweavman is on a distinguished road

Very simple modification, most difficult part, running and hiding your wiring from your 12v sourse to your new outlet.....Check marine or outdoor sporting co. for good sourses of add on 12v outlets, much cheaper than a Dodge dealer and good quality....You can wire it up so its hot all the time, or only when the vehicle is running, or the key is in ACC position.... You can use a test light to check for a 12v source to tap into, that has the characteristics you want...make sure to shield the wiring you run so that you will not get any chafing shorts or possible in line fuse to your new outlet is also advised,( that you can easily get to)... Check behind the area where your going to physically mount your new outlet to insure enough clearance, and that you will not cut into something hidden behind
So it is written ! So it shall be done!
Reply With Quote