View Single Post
  #23  
Old 03-20-2012, 10:35 AM
Minagera's Avatar
Minagera Minagera is offline
The Noob
 
Join Date: Sep 2011
Location: Huntsville, AL
Age: 29
Posts: 17
Gender: Male
Vehicle: 2009 Dodge Ram Big Horn
Trim Level: Big Horn
Color: Silver
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
Rep:26
Minagera is on a distinguished road
Default

Well I took the plunge and wanted to try this out. I got all the pieces in, including the xd2loader, and set to work. I got the v4.04 of DB-ALL loaded and installed the PnP harness into the truck. Connected in teh DB-ALL and get the red LED. Turned the key to on and I get the flashing green LED. Shut the key off and hit the lock button and sure enough I get a solid green LED for about 3 seconds. Thinking I am all good I hit the lock 3 times. I get nothing.

Now I think I may have a problem with the load, specifically with your note.

Note: When the XKLoader2 is setting up the DB-ALL, make sure that Program Option 1 is set to RF Out ON. This is what allows the DB-ALL to be a stand-alone starter. No aftermarket starter required. Only with this set to ON will the OEM remote FOB be able to signal the DB-ALL to start the truck.

I have the XpressvipHD loaded on my machine but I am at a loss to see the Program Option 1 to set RF Out ON.

Any advice?

Last edited by Minagera; 03-20-2012 at 11:18 PM.
Reply With Quote