View Single Post
Old 05-04-2012, 01:24 AM
Hootie7159 Hootie7159 is offline
Dodge Ram Forum Junior Member
Join Date: Oct 2011
Location: Sacramento, Ca
Posts: 38
Gender: Male
Vehicle: 2010 ram 1500 quad cab 4x4
Trim Level: Slt
Color: light silver
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
Hootie7159 is on a distinguished road

Here's a couple pic's of mine...2010 1500 4wd 5.7l ....atx artillery 17x9 4.5" backspacing....285/75r17
....had a slight rub on the inner fender walls with the 285's (34's) before the leveling kit


...after the 2" tuff country leveling kit, they only rubbed on the driver's side fender wall when cranked all the way to the left and going over steep curbs

photo.jpg have 6" procomp stage 1 lift....procomp website/instructions/and company rep's on the phone said my wheels would fit...but they didn't....would hit the tierods...only needed an 1" spacer but went with fred's ( 1.75" hubcentric wheel spacers so that i would have to cut the OEM studs down....with the 4.5" backspacing the wheels stuck out about an 1" from the they stick out 2.75" ( have already driven to the bay area and vibrations in 2wd/4wd/high speed/low speed...


Last edited by Hootie7159; 05-04-2012 at 01:27 AM.
Reply With Quote