View Single Post
  #11  
Old 05-20-2012, 05:35 AM
highwayman1's Avatar
highwayman1 highwayman1 is offline
Dodge Ram Forum Member
 
Join Date: Nov 2011
Location: Galesburg , Il.
Age: 56
Posts: 74
Gender: Male
Vehicle: 2012 Dodge Ram 1500
Trim Level: Tradesman
Color: Silver
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
Rep:10
highwayman1 is on a distinguished road
Default

Quote:
Originally Posted by trmat79 View Post
OK guys I am new here, but a week ago I bought a 2012 Ram 1500 Express 4X4 and the first thing I wanted to do was utilize the upper glove box and the Uconnect USB plug for my ipod. Here is my how-to:

First the parts:
4565022: Switch – glove box
1NM00BD3AA – Door – glove box
68050731AA – striker – glove box
1SF291DVAC – glove box
And some tools you’ll need:
Screwdriver (with some small screws)
7mm socket and driver
Trim Removal Tool (highly recommended to not scratch your dash)

The Beginning
Attachment 28108
Step One: Remove lower glove box by opening and pushing in on sides.

Step Two: Unscrew upper glove box screw:
Attachment 28109

Step Three: Use trim removal tool to take out upper box
Attachment 28110

Step four: Line up upper box door and screw in place. This will take some time. I recommend taking a good look at how it lines up and take your time in order to not break anything.

Attachment 28111

Step Five: Install light and latch

Attachment 28112

Step Six: Find UConnect and light plugs in the dash and hook them up. I highly recommend hooking up the light first then the USB.

Attachment 28113

Step Seven: Put lower box in place and screw in place.

Step Eight: Step back and enjoy the professional job you just did.
Attachment 28114

That is about all I've got you for guys. Maybe I just wasted an hour posting this and someone has done it before but I couldn't find it. Anyway love my Ram and this website rocks so I figured I'd give a little something back.

Todd
Yes , thanks for the info , I am now looking into doing this upgrade!
Reply With Quote