View Single Post
  #4  
Old 05-25-2012, 01:14 PM
defiant defiant is offline
Dodge Ram Forum Newcomer
 
Join Date: May 2012
Location: Durham NC
Age: 38
Posts: 12
Gender: Male
Vehicle: 1997 Ram 2500 4X4
Color: White
Engine: 1994-1997 360ci (5.9L) Magnum V8 230hp
Rep Power: 0
Rep:10
defiant is on a distinguished road
Default

I 2nd POR 15. I've used it on many projects over the last 12 years or so, and I've never had a problem. Follow the instructions, and it will be there longer than you have the truck. Actually I just stripped a frame I did eight years ago, because I used a cheap paint on top of the Por, and the top coat looked bad. I had a tough time sand blasting the Por off the metal, and not all of it ever came off the frame. Plan to use the whole container of POR 15 at one time, and wear gloves, it takes about a week to get it off your hands. If it's just surface rust (no holes,and no grease) you can hit it with a wire brush, use their metal prep, and apply the por with the chip brushes they sell. You don't have to top coat the por15 under the truck, but I would put something over it anyway. Their Chassis coat black would be an easier way for you to go. You'll have $85 or so wrapped up in it, but you won't have to worry about any more.
Reply With Quote