View Single Post
  #2  
Old 06-03-2012, 06:31 PM
Brian NY V10 Brian NY V10 is offline
Dodge Ram Forum Newcomer
 
Join Date: Jun 2012
Location: Upstate NY
Age: 41
Posts: 14
Gender: Male
Vehicle: 1994 Dodge Ram SLT V10
Trim Level: Laramie SLT
Color: White
Engine: 1994-2001 488ci (8.0L) LA V10 300 hp 450lb/ft
Rep Power: 0
Rep:10
Brian NY V10 is on a distinguished road
Default

There are other kits for cold air that route across the front of the engine to the other side. Google it and you can see pictures. Unless your spare batt is on the passenger side it should work fine. Or you could invest in an aftermarket ram or scoop styled hood and design your own cold air induction box since the air box is close to the center of the hood...K&N is the way to go anyway for more HP and MPG. Not much else we can do to our V10s. I know that there is a designed bevel on the throttle body (both ports for the upper and lower rails) that is there to create a suction or venturi to help with air flow for the upper range of RPMs so porting would most likely do more harm than good...

*edit:
Upon searching, I believe Fastman makes a 53mm TB that works...

Last edited by Brian NY V10; 06-03-2012 at 08:55 PM.
Reply With Quote