Originally Posted by FireWire
It does remember the previous setting>
When I go to work in the morning it is cool so no AC required.
However at the end of the day it is hot. It would be good if I could remote start the truck and have the AC come on so the truck could cool off a bit before I head home.
I question this now because the new Silverado 3500 I was just issued at work operates this way.
That is not entirely true, when I remote start my truck, either cold or hot weather the truck's "Remote Start Comfort Systems — If Equipped" kicks in, you have to have this feature on your truck and make sure you go into your EVIC and enable it. Here is the description right out of the manual:
Originally Posted by M.Scipione
The AC doesn't run when you remote start, it only kicks in when you put in the fob and turn.
My snowflake symbol is always on, really was annoying in the winter, but they do it that way to keep the windows from fogging.
Key in and turned = snowflake on, regardless of it's status last time you parked it.
Any time you turn it to auto/auto snowflake will turn on.
Remote Start Comfort Systems — If Equipped
When remote start is activated, the heated steering
wheel, and driver heated seat features will automatically
turn on in cold weather. In warm weather, the driver
vented seat feature will automatically turn on when the
remote start is activated. These features will stay on
through the duration of remote start or until the ignition
switch is turned to the ON/RUN position.
The Remote Start Comfort System can be activated and
deactivated through the Electronic Vehicle Information
Center (EVIC). For more information on Remote Start
Comfort System operation refer to “Electronic Vehicle
Information Center (EVIC)/Customer-Programmable
Features (System Setup)” in “Understanding Your Instrument
Hope this info helps.