View Single Post
  #1  
Old 06-23-2012, 07:25 AM
dankent's Avatar
dankent dankent is offline
Dodge Ram Forum Senior Member!
 
Join Date: Nov 2010
Location: Kitchener Ontario Canada
Posts: 261
Gender: Male
Vehicle: 2012 Ram 2500 Crew Cab 4x4
Trim Level: Laramie Limited
Color: White
Engine: 2011-20?? 409ci (6.7L) Cummins Turbo Diesel 350hp 800lb/ft
Rep Power: 0
Rep:32
dankent is on a distinguished road
Default Kit arrived :) installing now

I have mounted the two airbags in the back, other then missing 2-3/8 nuts and 2-3/8 lock washer, everything else to be present.

I have a couple questions now, the drivers side airbag is close to the springs .. not touching but very close ... about 1/4 inch away (will it be ok?):



the passenger side is alot further but looking at where the top is supposed to contact the pressure would be on one side of the sand paper like matt, will that cause problems when under load or will the pressure of the airbag be able to keep it flat?



I now come to the wiring and installing the pump ... need to find a place for the pump, anyone want to share where they mounted the air pumps ? Picture would be grand if you have one


thanks all.

dan

Last edited by dankent; 06-23-2012 at 07:50 AM.
Reply With Quote
Sponsored links