View Single Post
  #111  
Old 07-14-2012, 01:16 PM
fastNugly @ BP's Avatar
fastNugly @ BP fastNugly @ BP is offline
Bully's Performance

 
Join Date: Mar 2012
Location: Toronto
Posts: 17,890
Gender: Male
Vehicle: '15 Ram 1500 Longhorn EcoD
Trim Level: CC, 6'4", 3.92, LSD
Color: Granite Crystal
Engine: 2014-20?? 182.3ci (3.0L) L630DOHC V6 240hp 420lb/ft Eco-Diesel
Rep Power: 14
Rep:1787
fastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant future
Default

Quote:
Originally Posted by Bocephus View Post
You're right about the bolt size. I'm running aftermarket lugnuts to match the wheels and that's what size they are: 14mmx1.5
Thanks for confirming this....I knew you'd know
I read in another post that Stock lugs are 9/16 for 2011 and older.
The same post said that 2012 are different at M14x1.5 as you confirmed.

Quote:
Originally Posted by Bocephus View Post
Those are nice wheels man. Either one will look sick with that black.
I've never heard of anybody rubbing with 295s and stock wheels. (+19)
I researched for months and almost bought that same tire. Only reason I didn't is i wanted a lil more height. 285/65r20 = 34.6 x 11.2
I don't think you got the tire size right. 295/60r20 = 33.9 x 11.6
You are absolutely right on the 33.9x11.6.
I get that exact same number using this site, which I live by.
I always use this wheel size guide to check tire size vs originals or just tire size in general.
However, when I checked the Nitto website, this is what it had to say for the Terra Grappler specs
Shows it as 34.45 x 12.36.....
.....so do I go with the wheel size website I use (33.9x11.6) of Nitto's website (34.45 x 12.36)?

Quote:
Originally Posted by Bocephus View Post
You can run the 295s without rubbing with the +18 offset no doubt.
Maybe someone else with this setup will chime in and confirm.
I hope to figure this out soon or get other answers on this.
I want my wheels :smile up:
i may also run Mopar flares which I think stick out 1" and maybe ok with the -12 offset.
The rim guys says it will stick out 1-1.5"
How did you figure out how far it will stick out?

Misfits are a 0 offset and offer nothing else. where would this sit?

Quote:
Originally Posted by Bocephus View Post
My setup is barely tucked under the fenders. If you go with the 295s they will stick out some but not much. They'll stick out a lil more with the 0 offset and a lot more with the -12 offset.
The Addicts with +18 offset and some OEM 1" flares gets my vote.
You answered my question above....

Do you have front or rear pictures that show the tires placement to the fenders?

I have now ordered my 5100's. Not sure if Ill do the spacer and just crank the front to 2.1 and leave the rear or go the route you did.
What did that spacer run you?

Thanks for all your help.
__________________
for the best pricing in the business, email me @ sales@bullysperformance.com
2014 Ram Hemi Tuning now available from DiabloSport get yours today!
OB-Trinity T-1000's only $489!
100% Guaranteed to work or we will replace it for free!

Last edited by fastNugly @ BP; 07-14-2012 at 01:20 PM.
Reply With Quote