View Single Post
  #4  
Old 07-27-2012, 09:26 AM
RamTex's Avatar
RamTex RamTex is offline
Dodge Ram Forum Senior Member
 
Join Date: Apr 2010
Location: Bellevue, Ne
Age: 29
Posts: 1,456
Gender: Male
Vehicle: 2009 Dodge Ram 6.6L Hemi!
Trim Level: Crew Cab Sport 4x4
Color: Stone White
Rep Power: 6
Rep:366
RamTex is just really niceRamTex is just really niceRamTex is just really niceRamTex is just really nice
Default

Im 100% pos that the only differences in the top end is the push rod length and that some of the lifters are MDS depending on the transmissions, along with the springs and valve size of course... So as long as you dont change out the cam you should be fine. But do swap out the cam for IE: a 6.4 cam you would also need 6.4 pushrods so you will get the full bennifit of the cam...
__________________

"New Project" 1969 Road Runner
BV Heads,K1 Crank and Rods,Corrillo Pistons,ARP Head, Main, Side Studs and Rod Bolts,Spartan Eagle Cam,6.1 Manifold,Fastman 85mm,LMI Hammer, ARH's,3000TC,Hemifever Tuning
Reply With Quote