Thread: MAX tire size
View Single Post
  #5  
Old 09-07-2012, 11:34 PM
fastNugly @ BP's Avatar
fastNugly @ BP fastNugly @ BP is offline
Bully's Performance

 
Join Date: Mar 2012
Location: Toronto
Posts: 18,168
Gender: Male
Vehicle: '15 Ram 1500 Longhorn EcoD
Trim Level: CC, 6'4", 3.92, LSD
Color: Granite Crystal
Engine: 2014-20?? 182.3ci (3.0L) L630DOHC V6 240hp 420lb/ft Eco-Diesel
Rep Power: 16
Rep:1804
fastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant future
Default

EODTruck,
Straight answer here.
You will rub for sure with 33x12.5 tires on stock wheels.
That is 100%

Heck, even at 295/60/20 tires you'll rub. Which is a 34" tire
You will require spacers for either setup or an aftermarket rim with negative offset.

Stock rims are 20x9, +19 offset.

If you don't believe me, take your tape measure and measure from your tire to your A arm. You have max 1/2" space till it rubs.

Many members here are running 295/60 and 33/12.5 tires and 295 requires 1/4" spacer and 33x12.5 requires a larger spacer but anything more than 1/4" I recommend another set of aftermarket rims with lower offset. Like a 0 offset.

295/60 = 0.4" wider on either side of wha you have now
305/55 = 0.6" wider on either side.
315/55 = 0.8" " " " "

You have to do either of the following or a combo depending on tire size selected.
- level your truck
- use spacers
- get aftermarket rims

Cheapest of the 3 is 1/4" spacers and then leveling.


Its not more so the height, rather the width...again pertaining to the tire sizes mentioned above.
Hope this helps
__________________


click here ---> Got Factory Air Suspension? - Want to Lift or Lower? <---click here


sales@bullysperformance.com


Last edited by fastNugly @ BP; 09-07-2012 at 11:39 PM.
Reply With Quote