Originally Posted by readster1
This looks like it might be a good upgrade, but what I was wondering is on the factory key fob there is what seems like extra buttons so when you first activate the key instead of pressing the lock button could another button be utilized instead???My other question is:when the lock button is pressed 3 times does the trucks horn honk or does it know you are trying to start the truck and bypasses this feature,and does it lock the doors and honk the horn when you just press it once??Also is it possible to set up the dball to act like the factory remote start where the heated seat and steering wheel will come on or the A/C when it is warm?? Just curious hope some will chime in that has knowledge on this thanks in advance
Im sure you guys already know this, but I found this today at work about the horn chirp:
Sound Horn With Remote Key Lock
This feature will cause the horn to chirp when the doors
are locked with the RKE transmitter. This feature can be
turned on or turned off. To change the current setting,
proceed as follows:
• For vehicles equipped with the EVIC, refer to “Electronic
Vehicle Information Center (EVIC)/Customer-
Programmable Features (System Setup)” in “Understanding
Your Instrument Panel” for further
• For vehicles not equipped with the EVIC, perform the
1. Press the LOCK button on a programmed RKE transmitter
for at least four seconds, but no longer than ten
seconds. Then, press the PANIC button while still holding
the LOCK button.
2. Release both buttons at the same time.
3. Test the feature while outside of the vehicle by pressing
the LOCK button on the RKE transmitter with the
ignition switch in the OFF position and the key removed.
4. Repeat these steps if you want to return this feature to
its previous setting.
NOTE: Pressing the LOCK button on the RKE transmitter
while you are in the vehicle will activate the Vehicle
Security Alarm System. Opening a door with the Vehicle
Security Alarm System activated will cause the alarm to
sound. Press the UNLOCK button to deactivate the
Vehicle Security Alarm System.
Using The Panic Alarm
To turn the Panic Alarm feature ON or OFF, press and
hold the PANIC button on the RKE transmitter for at
least one second and release. When the Panic Alarm is on,
the headlights will turn on, the park lights will flash, the
horn will pulse on and off, and the interior lights will
Any one know if we can use one of the other buttons on the fob instead of the lock one?