View Single Post
  #3  
Old 11-15-2012, 05:34 PM
fishwater fishwater is offline
Dodge Ram Forum Senior Member!
 
Join Date: Dec 2011
Location: New Hampshire
Age: 43
Posts: 97
Gender: Male
Vehicle: 2013 Sport QC Maximum Steel
Trim Level: Sport
Color: Maximum Steel
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
Rep:11
fishwater is on a distinguished road
Default

TPMS sensors by design are extremely accurate while manual tire pressure gauges even expensive ones are generally off. Since you checked it with two separate gauges hopefully of good quality I would say the vehicle is doing something on the display. I sell TPMS tools & sensors, I have checked my sensors hundreds of times during demos & mine are accurate to the Evic within .3 lb. I would recheck the pressure with a high quality gauge & see if the readings are different. The other option if your really curious is to check the sensors with a quality TPMS tool like the Bartec, by reading the sensor at the wheel you will have the exact pressure reading of the sensors before the info is sent to the module. Most every major tire chain has a Bartec 400 & it takes less than 5 minutes to check.
Reply With Quote