View Single Post
  #2  
Old 11-18-2012, 08:22 AM
MF2000's Avatar
MF2000 MF2000 is offline
Dodge Ram Forum Member
 
Join Date: Dec 2011
Posts: 300
Gender: Male
Vehicle: 2009 Ram Crew Cab
Color: Inferno Red
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
Rep:13
MF2000 is on a distinguished road
Default

I did a quick search and found the below. I would recommend checking all your connectors before replacing the EGR. After doing this, you want to try this:

1. Disconnect the wire harness from the EGR valve.

2. Turn key ON and erase the trouble code(s) from the car's computer AND TURN KEY OFF IMMEDIATELY WHEN THE SCANNER SAYS CODES HAVE BEEN ERASED. DO NOT TURN KEY ON BEFORE YOU RE-CONNECT EGR WIRE HARNESS.

3. Re-connect EGR wire harness and your problem should be fixed.

I learned this fix from OBDII.COM where carfixer and kozloski discussed it and I think kozloski was the one who provided the solution, so thanks to them.

There was also other people stating that this fix really works. Now I have joined this group of people as I got mine fixed using this trick also.

I believe erasing codes with wire harness disconnected and turning the key OFF right after P1404 code has been erased re-sets the 'Valve Close Position' reading in the computer and triggers computer to re-learn position next time the key is turned ON.


Good luck and let us know if this works.
Reply With Quote