View Single Post
Old 11-24-2012, 12:54 PM
tguil tguil is offline
Dodge Ram Forum Senior Member
Join Date: Jan 2012
Location: Nebraska
Posts: 435
Gender: Male
Vehicle: 2012 Ram
Trim Level: Big Horn Quad Cab
Color: White
Rep Power: 0
tguil is on a distinguished road

Being a little anal, I filled in the "empty" hole in the back mud guards with black plastic rubber. Looks a bit more complete that way.

On the front guard you might want to drill for the top hole. Otherwise the top of the mud guard is not real snug and dirt can collect behind it. I don't think rust forming will be a problem. I've been installing mud guards for lots of years and have never had rust problems. To be extra sure, put a dab of primer in the drilled hole and let it dry before putting in the screw.

How did your rear mud guards fit against the wheel well liner? Mine don't fit flat and mud collects behind them . The mud guards were designed to be used without the liner. Maybe this was changed on the 2013 models.
2012 White Hemi 1500 QC, 4X4, Big Horn Edition, Protection Group, Luxury Group, 3.92 Anti-Spin, Mopar Bedliner, Mopar Tubular Side Steps, Mopar Molded Mud Guards, Access Roll Up Tonneau, Michelin LTX AT 2's
Reply With Quote