View Single Post
  #8  
Old 12-13-2012, 10:59 PM
fastNugly @ BP's Avatar
fastNugly @ BP fastNugly @ BP is offline
Bully's Performance

 
Join Date: Mar 2012
Location: Toronto
Posts: 18,081
Gender: Male
Vehicle: '15 Ram 1500 Longhorn EcoD
Trim Level: CC, 6'4", 3.92, LSD
Color: Granite Crystal
Engine: 2014-20?? 182.3ci (3.0L) L630DOHC V6 240hp 420lb/ft Eco-Diesel
Rep Power: 16
Rep:1787
fastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant futurefastNugly @ BP has a brilliant future
Default

Quote:
Originally Posted by Arth View Post
It's really REALLY easy. First you can use a flat head screw driver to loosen the clamp that holds the intake onto the TB. Then just pull the intake off the TB.

For the Hemi Hat just gently pull up and pull it towards you and it will come right out. Just push the hoses down that are underneath it.

For the TB itself it has four bolts and the electrical connector. I think the bolts are 7MM... not 100% on that. They aren't very tight at all. Take those four out and disconnect the connector and that's it.

Swap, replace, and your done!
Exactly this!
Easier than a cabin filter mod.......seriously though
__________________


click here ---> Got Factory Air Suspension? - Want to Lift or Lower? <---click here


sales@bullysperformance.com

Reply With Quote