View Single Post
  #84  
Old 01-26-2013, 02:23 PM
theweavman theweavman is offline
Dodge Ram Forum Senior Member!

 
Join Date: Oct 2010
Location: Las Vegas, NV
Age: 66
Posts: 367
Gender: Male
Vehicle: 2009 Dodge Ram 4X4
Trim Level: Laramie Crew Cab
Color: Austin Tan Pearl &Lt. Graystone Pearl
Engine: 2009-20?? 345ci (5.7L) Hemi V8 390hp 407lb/ft
Rep Power: 0
Rep:27
theweavman is on a distinguished road
Default

LoneWolf,
Currently, without a Catch Can, there will NOT be any oil accumulation in your intake system.....The oil you will be catching once you install your catch can, currently gets introduced into your TB as an oily vapor, is mixed with incoming air, and taken into the combustion chamber to be burned up with your normal air/fuel mixture. Once you have your catch can installed this oily vapor, will condense back into liquid oil and be taken into the CC container.....Thus you will no longer be burning this oil in your combustion chamber, allowing a better air/fuel mixture....So don't worry about any mess to clean up....If you wish, as mentioned, you can clean your TB....as these get dirty normally anyway, and its a good time to do it while your working in that area
__________________
So it is written ! So it shall be done!
Reply With Quote