DODGE RAM FORUM banner

Dragging brakes

2K views 7 replies 3 participants last post by  mb power wagon 
#1 ·
I unhooked my ebrake cause I thought it was the cause but at low speeds I can feel my driver side brake or ebrake drag can anybody help
 
#7 ·
LOL the wires don't go to the caliper, they are part of the hub bearing. That's why it is important to know if you have 2 or 4 wheel ABS when you go to replace your hubs. They have nothing to do with the caliper.

Had a sticking caliper and ebrake replaced caliper brakes are amazingly better and I adjusted the ebrake to the loosest setting and now I have a abs and brake light on please help
Did you lose alot of fluid when you rebuilt/replaced the caliper? Was it bled? If you lost enough, the ABS module may need to be bled (requires diagnostic tool). Also you'll probably need to readjust your e-brake as it isn't supposed to be as loose as you make it sound.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top