I have seen quite a few people on here with 6" suspension lifts that have also added the Bilstein 5100s to add another 2 inches of lift. I am curious as to how tis is working for you guys considering ( at least in my case with the Pro Comp lift) that the lift actually adds 6in in front with 4 in the back leveling out the truck. Its seems the Bilstein's adding the addition lift in front would give it a front high stance. Am I missing something here?
I know a lot of these people here have posted pics of their lift but our internet restrictions out here seem to filter or block most of the posted pictures from displaying so I havent been able to see for myself.
i ask because its seems my lift installed for some reason is about an inch shorter than most other lifted 4th gen 1500s that I have come across, even compared to those with the same Pro Comp lift. So I woudlnt mind getting an addition 2 inches out of it with out risking excessive wear on my CV joints.
Thanks for any advice/input you may have with this.
I know a lot of these people here have posted pics of their lift but our internet restrictions out here seem to filter or block most of the posted pictures from displaying so I havent been able to see for myself.
i ask because its seems my lift installed for some reason is about an inch shorter than most other lifted 4th gen 1500s that I have come across, even compared to those with the same Pro Comp lift. So I woudlnt mind getting an addition 2 inches out of it with out risking excessive wear on my CV joints.
Thanks for any advice/input you may have with this.