DODGE RAM FORUM banner

driver side door mirror

1K views 5 replies 4 participants last post by  mlrtym 
#1 ·
My '97 with power adjust mirrors, needs it's driver side pivot tightened up. It's loose enough, that at 40 mph, it's usually flat against the door.
Am I correct in assuming that I need to take off the inside door panel to remove the mirror? I also assume there is a 'nut' to tighten a friction disk or something similar? If so, is there any hidden snaps or special removal techniques other than a 'typical' door panel removal?

LOL, I need all 'facilities' up to snuff for next months 'road trip'....
(you all are thinking...'Beverly Hillbilly')?? I won't have granny bungee strapped in the box though!
 
#5 ·
Tom,

Pop the panel on the inside the door where the mirror connects and unbolt it. See if you can find a way to do it. Worst that can happen is you waste an hour.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top