He is looking at -25 offset on 10" rims, I think it might rub. If you like the rims/tires, look into a 2" spacer to level the front and you will be fine. I used to run a 275/65/20 on stock rims and had no problem, but i did have a level kit. Stock I think you would possibly rub at the rear fender area and maybe anti sway bar.
Inner clearance won't be the problem you will have plenty of room between the wheel and suspension. I've never ran this set-up but I do believe that you will run into issues with rubbing on the frontair dam and possibly the rear of the wheel well.
Compared to stock wheels, the ones you want will stick out 68mm more, or roughly 2.75".
Like gopackgo69 pointed out, it's the width and offset that will be the issue, not the tires.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
DODGE RAM FORUM
2.2M posts
201.9K members
Since 2008
We’re the ultimate Dodge RAM forum to talk about the RAM 1500, 2500 and 3500 including the Cummins powered models.