Help SOS - Radio screen blank!
I was starting to do some pre-wire for the system I plan to install on my (8.4A - No Alpine). I was tapping the speaker level wires so I could add a clean sweep and realized I should disconnect the battery to be safe.
So I did, tapped the lines etc, re-connected and no screen at all. There has to be a fuse or something I messed up, the stereo was working just fine minutes before. I found no fuse for Radio in the manual.
I tried jiggling all the wires in to the harness that plugs in to the radio, I disconnected where I tapped the speaker levels, triple checked that what I did tap was in fact the speaker wires. Not sure where else to go other than the dealer.
What could have happened?