i'm driving and out of no where the engine and dash gauges, completely shuts down. I pull the hood and i disconnect the pcm bulk connect and reconnect them and then dash gauges are alive again so now the van will crank. The Bulk head connectors have been replaced.
Now for the next problem. My engine light is on and the code scanner shows the code for the idle air control, I replaced it three times thinking the auto parts store gave me a defective part. Now keep in mind the shut down problem was going on 6months before the engine light and i took the van to a dodge dealer in Columbus GA. and they kept it 3 days and said they could not find anything wrong. 3 to 6 months later i took the van to the dodge dealer again and they cleaned the throttle body and told me they needed to replace 2 of the bulk connectors, so with everything done i continued having the shut down problem and now gained a knew one, the engine light on with the code saying IAC.