thanks guys. appreciate it. i picked up the carbon fibre at canadian tire its ina roll like window tint. it actually isnt to difficult to do. just takes time and patience. just lay it on using something like a credit card to smooth it on with no bubbles, if their are lots of curves or anything you will need to use some heat. it loves heat. i lay it all on the cut after. cutting you have to be very cautious so if u slip or dont like it u dont cut into the factory plastic. just takes time and a steady hand.
Interesting that canadian tire has this. Did not know that.
Thanks for sharing this
I have a wood grain in the middle as well, I just ordered some carbon fibre wrap. Does the wood grain and the grey parts on the side come apart? If not did you have to try and cut a line where they connect since you can't wrap it around the back?
EDIT: Also how hard is it to remove the wood from the door panels to wrap them? Any write up on how to remove them?
2016 F250 Lariet FX4 CrewCab 6.7L
2012 Dodge Laramie 4x4 CrewCab Supercharged and Lifted - SOLD My Build Progress