does anyone know the measurements for the factory 20" wheels?...20x?? i think i want to go with a wider wheel to fit my new tires. the tires are 33"x12.5"x20" the tires just dont look right, and does anyone know if this will be a problem? the tires rub at full lock, if i go to a wider wheel will this eliminate the rubbing or do i still need to add 1/4 wheel spacers? THANKS IN ADVANCE for your help.
Engine: 1998-2001 360ci (5.9L) Magnum V8 245hp(standard), 250hp(Sport package)
Rep Power: 20
Don't hold me to it . But from what I've read , there is some issues with the offset of the wheels . They tires will rub the control arms . If you run a wider tire you'll need to make sure the offset is correct . Hopefully someone else with a 4th gen ram will speak up here shortly .
this is what i do know.. on a 2010 ram big horn with mickey thompson atz LT 305 55 20" tires they will rub at full lock (turn) on the stabilizer bar. i keep hearing that the stock wheels are 8 or 9" wheels.. so i grabbed my tape measure and a straight edge.. i pulled the tape from the inside of the wheel to the face of my wheel and i measured 9"s so for nowI am calling the stock wheel a 20"x9" wheel. also from what i found the wheels have a +19.05mm offset. so if i am correct you would need a rim with a +17mm or so wheel to stop the sway bar rub. does that sound right to you guys?..... more to come