Originally Posted by sonocativo
Sounds like the blower motor resistor went out, it is what the wires plug into on the blower motor, held on by 2 screws. I believe they run about $100-$125
I just removed the blower motor and see the 2 screws you are referencing, but don't see any way of accessing anything internal to the blower by remving those two screws. It is a completely molded housing. I'm assuming I'll have to remove the rotating blower and go at it from that way. May just be easier to go to a local junkyard and get an operational blower motor that way and replace the whole thing. Thanks for the quick response.