You got it right!
For crew cab:
Driver 802AB (purple tag)
Passenger 801AB (green tag)
Driver spring should have been roughly 1/2 inch longer.
How much drop did you end up with? I cut 1.5 coils on my quad cab (different springs) and only ended up with about 3/4" to 1" of drop... I used RT springs (about same overall length as my stock QC springs) and cut them. If you just swapped to the RT springs you'd probably drop an inch right off the bat.
EDIT: Do you have any pics of your springs?
Breathing in and out is good enough for me.
Last edited by snrusnak; 12-28-2011 at 10:05 AM.