DODGE RAM FORUM banner

Mod #5 LED Tails and Turns

2K views 0 replies 1 participant last post by  ShawnC13 
#1 · (Edited)
So I had already done the back up lights and then wanted to do the brake lights so that is what this is about. First make sure you get RED LED's otherwise I a white would shine right through the lense.

All was going great brake light worked then the next day drove to work and turned on the signal.

I got 3 regular flashes then HYPERFLASH. So with the help of the guys on here they lead me to the right Load Resistors. 6Ohm 50 Watt. I got 4 off of ebay for 15 bucks.


The load resistors on the right rear go on Black and Wh/Yl and on the left it is Black and Wh/Gr. Even after reading this I put the left on the white yellow and knew as soon as I got the hyper flash what I had done. So now I am one splice cap short for the fronts when I do them.
 
See less See more
3
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top