If you own a 1994 or newer Dodge Ram 2500/3500, then you’re already aware that the factory steering system is less than desired. As these trucks begin to age, the problems only seem to magnify. You notice that the truck seems to “wander” while driving and you’re constantly trying to compensate. Then comes the “Death Wobble” and you find yourself in a crazed panic as the steering wheel violently shakes your whole body uncontrollably. The harsh and abrupt movement of the tires transfers all the way through the steering system to you…the driver, and all you can do is try to get the vehicle stopped before an accident occurs. If any of this sounds familiar, then our steering stabilizer brace is your answer. You are basically adding an additional cross-member in the front of your chassis where that Cummins torque monster is twisting the frame and causing the rails to flex and fatigue. Our steering stabilizer brace is made of 1/4” premium grade steel tubing to completely eliminate frame flex and put some extra integrity back into your truck. Not to be confused with a factory steering “damper” that only provides a small cushion to absorb roadway imperfections and reduce steering kick back. As always, Custom Diesel, Inc products are 100% American Made and shipping is FREE! Manufactured with unsurpassed quality and backed with a Lifetime Warranty, you’re certain to regain control of your rig. Check out the link below for additional information or to place your order. Each kit also comes with a free Custom Diesel hat.