Originally Posted by bigmikelrg
O ok just leme know
Ok here is the beginning of the list, this is for a 46RH/RE.
I am going to list part number and description.
22002E Overhaul Kit Transtec
22030EC Bushing Kit (Contains Clevite Bushings)
M465TJ Transjel Assembly Lube
Neutral Safety Switch
B220022A Front Flex Band Borg Warner
A22024B Rear Band Raybestos
A22936 3-4 Shift Accumulator Spring
A22853 Front Clutch Spacer Cushion
A22654A Sprag, 727 / 518, 14 Spring & roller
A12650 Sprag, A500 / A518 / A618 Overdrive clutch 1990-UP
12271 Bearing, A500 / A518 / A618 Output Shaft Front
22272A Bearing, A727 / A518 / A618. Output shaft (rear)
D12222 Bearing, A518 / A618, Overdrive inner sprag to output shaft
22200E Thrust washer kit, A518 / A618, 1990-2002 ONLY IF YOU NEED TO REPLACE THEM
A22582EK Front Planet Kit, 5 Pinion (Retrofits 90-Up) , A518 / 618,
Now for the frictions and steels the quantity and thickness will vary based on application.
But they're Alto Brand, Red Eagle Frictions and Kolene Steels But here we go...
027721K STEEL, 7
027723K STEEL, 3
028701L STEEL, 6
028740PL FRICTION, 3
028742 FRICTION, 4
027746 FRICTION, 4
027744 FRICTION, 8
You will also need to get a filter
External Transmission Cooler
The proper electronics other than the neutral safety switch,
12415B Sensor, Governor pressure, (Transducer), A518, A618 (96-99), A500 (96-99)
12432A Solenoid, A500 / A518 governor pressure SOLENOID, 1993-UP
12420B Solenoid, A500 / A518 / A618 Dual OD & TCC
Removal of Anti-Drain Back Valve
Upgrade the rear planet to a 6 pinion, there is a steel carrier and an aluminum carrier, I have always done well with an aluminum carrier, only need steel if you are driving some serious HP into it.
I got mine on ebay because it's less expensive, makco sells it too!
You need to replace the manual valve with the sonnax one, 22771-09
Replace pressure regulator valve with sonnax, 22771A-02K
Replace overrunning clutch outer race with a bolt in one or you can machine the original one so you can run bolts into it. http://smrtrans.tripod.com/smrtransm...ntro/id17.html
If the truck is 2WD you need to get the slip yoke boot seal, part number 7300S can get it at autozone.
Be sure to take apart the transmission first so assess damages etc...
There are some more parts I may throw at you, oh yea and be sure to get a better torque converter!
Any questions, ask please.