im new to the forum and i dont know alot about suspention. im readin ups and downs about the belltech 963sp kit. the pictures on jegs website show the kit but is it the actual kit or just a general image? what all is included in this kit and where does it go. i know the blocks are for the rear but in the pic i have it shows one set of springs and two sets of shocks. i looked at my truck (2012 ram express qc black) and in the front i see a shock inside a spring and the rear i just seen a spring. so why 2 sets of shocks and one set of springs? im also reading about the trac bar relocator and some are saying the new kits come with them but i cant seem to find a for sure anwer can someone please help me figure this out?
Your truck comes with 4 springs and 4 shocks. In the front the shocks are located inside the spring in the rear the shocks are just next to the spring. The picture on jegs is just a generic picture. The kit should come with 4 springs, 4 shocks, 4 bump stops, 2 short end links and some hardware. I'm guessing you will have the kit installed professionally?