Originally Posted by goingcrazy
Just checked with MHT and the first ones I linked are sold out in the 20x10 but they do have them in a 20x12 with a -44 offset.
My question now is about the width. with -44 offset on a 20x12 rim I'm looking at about 7 inches of rim sticking out from the mounting surface of the rim. On full turns would that be too wide for 35x12.50 with just a leveling kit? I'm afraid that I will clear the control arm but end up rubbing the tires on the fender/bumper on full turns.
I can't speak from experience, just what i've heard and seen. Those wheels will not fit without a 6"+ lift from what I understand.
Compared to stock 20x9's the 20x12 -44 will stick outward 4" from stock. Not only do I think it will look funny, but you will be hitting your fender when turning. On the plus side, you will have plenty of inner clearance between the wheel and the suspension.