DODGE RAM FORUM banner

295/60/20 anyone ??

8K views 7 replies 4 participants last post by  calvinmx48 
#1 ·
Still awaiting my new truck and trying to decide if I go 35x12.5 or 295/60/20
Anyone have pics of a leveled 4th gen on 295/60/20 set up ??
I will be buying nittos trails
Thanks guys
Cale
 
#3 ·
Thbaks

Thanks for the pic
Curious as to the rub. As the 35x12.5x20 don't rub on a level
Hmmmm
Thanks
Cale
 
#6 · (Edited)
Yes

Yes I agree wheel specs play a huge roll. I will be using a fuel wheel with 0 offset
On bills probably at 2.8 and a 1" tgc spacer out back and yes trail grapplers
But I still have my 13' and waiting dr the dealer to deliver my 14'
Thanks
Cale
 
#7 ·
If you're only going to level the truck I'd personally recommend going with a 295/60/20. Going to a full 35x12.5 (especially a Nitto Trail) looks a little stuffed IMO. But that decision is really up to you and on what you think looks good. There are a number of threads in the wheel/tire section of the forum full of pictures of guys' set ups. It's definitely worth taking a look through there to see what you like.

I was running a 2.5" leveling kit and 0.75" rear spacers on my 1500 with 35x12.5 Toyo MT's (before I lifted it). Take a look at my wheel/tire thread linked in my signature below. It has quite a few pics of that set up so you can see how it looks.
 
#8 ·
Yes

Yes that's what I don't want and that's why I'm leaning towards the 295/60/20 as I don't want the wheels to look too big
Cale
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top